KN95 Respirator - Individually wrapped - Pack of 10
Now in stock!
Certified KN95/ FFP2 Disposable face mask in a pack of 10
- Certified CE
- Individually wrapped
- 4 ply, Non-woven Melt blown filtering media
- Electrostatically charged to attract fine particles
- Flat fold design provides better face seal
- Hypoallergenic inner layer to prevent skin irritation
- Low breathing resistance
- Laboratory Tested and official certificated
Certified KN95/ FFP2 Disposable face mask in a pack of 10
Disposable respirators, are subject to various regulatory standards around the world.
During pandemic or emergency situations, health authorities often reference these standards when making respirator recommendations, stating, for example, that certain populations should use an “N95, FFP2, or equivalent” respirator.
- Australia’s P2 standard,
- USA’s N95 Niosh standard,
Respirators certified as meeting any of these standards can be expected to function very similarly to one another.
You are buying certified KN95 Flat Fold Masks. The KN95 specifies that respirators filter performance is ≥ 95%. Please see the comparison table below.
*NB. We will not supply AS/NZS 1716:2012 certified masks while there is a national shortage for Australian Hospital and Emergency departments.
Certification/ Class (Standard) | N95 (NIOSH-42C FR84) | KN95 (GB2626-20 06) | P2 (AS/NZ 1716:2012) |
Filter performance – (must be ≥ X% efficient) | ≥ 95% | ≥ 95% | ≥ 94% |
Test agent | NaCl | NaCl | NaCl |
Flow rate | 85 L/min | 85 L/min | 95 L/min |
Total inward leakage (TIL)* – tested on human subjects each performing exercises | N/A | ≤ 8% leakage (arithmetic mean) | ≤ 8% leakage (individual and arithmetic mean) |
Inhalation resistance – max pressure drop | ≤ 343 Pa | ≤ 350 Pa | ≤ 70 Pa (at 30 L/min) ≤ 240 Pa (at 95 L/min) |
Flow rate | 85 L/min | 85 L/min | Varied – see above |
Exhalation resistance - max pressure drop | ≤ 245 Pa | ≤ 250 Pa | ≤ 120 Pa |
Flow rate | 85 L/min | 85 L/min | 85 L/min |
Exhalation valve leakage requirement | Leak rate ≤ 30 mL/min | Depressurization to 0 Pa ≥ 20 sec | Leak rate ≤ 30 mL/min |
Force applied | -245 Pa | -1180 Pa | -250 Pa |
CO2 clearance requirement | N/A | ≤ 1% | ≤ 1% |
This face mask meets EN149:2001 or GB2626-2006 standard for respirators. EN149:2001 and GB2626-2006 standard certified products are designed to protect against solids, water-based aerosols, and oil-based aerosols.